These control levers are very substantial and perfect for the high control loads encountered during demanding 3D style flying particularly with 46/50 powered machines swinging 600mm blades.

Machined from solid and fitted with extra wide (5mm each) twin bearings for zero side movement and high durability. Control balls are hardened steel with M3 fixing threads and come pre-installed along with a pair of socket cap style mounting screws. 

The same high specification the best selling V1 head block, this version features a revised centre pivot and bearing installation to allow for the larger V2 6mm feathering spindle.

NOTE: Picture shows optional flybar carrier and head button fitted - (Not included) 

A must for turbine smooth high speed running and accurate cyclic response. Crafted from solid in a single fully automated machining operation this headblock is supremely accurate, very strong and light.

Fitting this component will instantly increase control resolution and reduce the vibration often associated with the original moulded plastic unit. All standard head parts and bearings can be easily transferred and no set-up changes are required.

Just 2 grammes heavier than the standard plastic block and available in "Satin" Silver, Blue, Purple and Red finish.

This superb fully cnc machined swashplate uses a high quality radial bearing and an aviation grade PTFE lined chrome steel centre swivel ball. The main bearing features special pre-load adjusters to eliminate any play and allow future re-tensioning. Fully removable stainless steel control balls feature 1.5mm allen key fittings.

At just 18 grammes this unit is identical in weight to the standard plastic swashplate but offers exceptional rigidity and high resolution. A "sixth" ball has been fitted opposite the one required for the driver arm so as to provide a fully balanced assembly. The overall thickness of the swashplate has also been reduced by 2.5mm compared to the original and so allows an increased collective travel.

Available in "Satin" Silver, Blue, Purple and Red outer with contrasting silver inner section.

This component has been designed to prevent movement of the tail drive pinion gear. Often the threads in the original plastic unit are overtightened and damaged resulting in the gear lifting out of correct mesh. Our alloy unit provides secure threads that can be fully tightened time after time.

Supplied complete with shorter M2.5 socket screws for minimal weight, new bearings are pre-installed. The completed assembly is no heavier than the stock plastic part.

Available in "Satin" Silver, Blue, Purple and Red finish.

Many 30/46 class helicopters have poor access to the regular throttle arm often requiring long "stand-off" ball connections which are flexible.

Throttle "arm" is tapped with M2 size threads

Available in polished alloy or anodised in blue, purple or red.

Superb CNC machined lightweight alloy flybar carrier. A direct replacement for the original plain alloy unit, this item is approx' 10% lighter and has a superior hard wearing anodised finish.

Supplied complete with pre-fitted twin sealed ballraces and provision for fitment of the lightweight head button (Part # RH-05)  

This head button is designed as a direct fit on our own flybar carrier (Part # RH-04) and provides a stylish and practical way to slow your rotor by hand.

Low weight is the key design point and this item whilst being 30mm in diameter, weighs just 5 grammes. 

Manufactured from stainless steel and precision ground for an excellent bearing fit. This mainshaft is solid rather than hollow like the original and is particularly well suited to withstand the loads often associated with novice flyers.

Supplied one piece per pack. 

Made from precision ground stainless steel for excellent strength and corrosion resistance. A direct replacement for the standard unit

Supplied one piece per pack. 

A direct replacement for the original hexagonal bar canopy pylons offering improved stiffness via the enlarged mounting flange.

Available in red, blue and purple to further customise your machine.  

Raptor rotor head parts. at a special price

The Quick UK  "combo package" contains headblock, blade grips,in-line flybar arm, flybar carrier, head button and Bell - Hiller mixer arms at a price that represents more than 20% saving over the cost of purchasing the individual components.

A direct replacement for the original hexagonal bar canopy pylons offering improved stiffness via the enlarged mounting flange.

Available in red, blue and purple.

Raptor rotor head parts. at a special price

The Quick UK  "combo package" contains headblock, blade grips,in-line flybar arm, flybar carrier, head button and Bell - Hiller mixer arms at a price that represents more than 20% saving over the cost of purchasing the individual components.

CNC machined alloy control arms have twin sealed ballraces and high tensile M3 control hardware. Alloy washout base features precision reamed brass sleeve for a smooth and long lasting slide action.

Supplied complete with replacement drive arms with pins and clips.